www.ShootForum.com

After finding out how hard it is to track down a dive centre for testing of bottles and refills, my latest project is setting up my own fill point at home

Not quite as simple as it sounds. Once you have one of these
https://www.amazon.co.uk/gp/product/B01 ... UTF8&psc=1

You then need all the bits to make it work
Plug adaptors
https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
Coupling adaptors
https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
Oil
https://www.amazon.co.uk/gp/product/B00 ... UTF8&psc=1
Air Filter Compressor Oil-Water Separator
https://www.amazon.co.uk/Modaily-Compre ... W8JMYBMADH
Water pump
https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1

And a button battery for the temperature gauge

A bucket or two for the water cooling pump for the air and to hold your prayers when you use it

I did do a quick fill on an s200 air cylinder, which took seconds to fill